Cooktop Maintenance
WARNING
Turn off power and let all surfaces cool before cleaning the cooktop. Wear rubber
gloves and be mindful of sharp edges.
Cleaning the Cooktop Surface
Clean up spills immediately.
Cleaning Stainless-Steel Surfaces
Remove spills, spots and grease stains with a soft, wet cloth.
1. Apply an approved stainless-steel cleanser to a cloth or paper towel.
2. Clean one small area then another, rubbing with the grain if applicable.
3. Dry the surface with a soft, dry cloth.
CAUTION
•
Do not use steel wool, sharp scrapers, or abrasive cleaners that can damage the
range.
•
Do not remove the cooktop basin. Gas lines can be damaged, perhaps causing a fire/
malfunction.
•
Do not pour water into the cooktop. The water could enter the mechanisms below,
causing an electric-shock hazard or high levels of carbon monoxide from corroded
gas valves/ports.
•
Do not spray cleanser into the manifold holes. The ignition system inside them must
remain dry.
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 85
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 85
1. Turn off all burners.
2. When the grates have cooled, remove
them.
3. Clean the cooktop surface with a soft
cloth. If spills run into gaps in the
burners, remove the burner caps and
head and wipe up the spills.
4. When finished, reassemble the
burners and reposition the grates.
English 85
2023-02-23 오후 5:09:11
2023-02-23 오후 5:09:11