Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
If you experience an issue with your range, review the tables in this section to resolve
it. If you cannot find a solution, call Dacor Customer Assurance 833-353-5483(USA),
844-509-4659(Canada) for assistance.
Gas Safety
Problem
You smell gas.
Surface Burner
Problem
No burners light
Burner does not
light
Burner clicks
during operation
Burner not
burning evenly
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 99
FULL_DOP36C86DLSDA_DG68-01507A-00_EN+MES+CFR.indb 99
Possible cause
Burner is ON, but burner is
not lit.
Gas leak.
Possible causes
Cooktop is unplugged.
Blown fuse/tripped circuit
breaker.
Gas supply not on or
improperly connected.
Control knob not set
properly.
Burner caps not in place or
burner base misaligned.
Control knob in flame
position.
Burner improperly
assembled.
Dirty burners.
Action
Turn the burner knob to OFF.
• Evacuate the building.
• From a neighbor's home (your
phone may cause a spark that
ignites the gas), immediately call
the gas supplier and follow their
directions. (If you cannot reach
your gas supplier, call the fire
department.)
Action
Ensure power cord is plugged into a
live, grounded outlet.
Replace fuse/reset circuit breaker.
See the Installation Instructions.
Push in knob and turn to flame
symbol position.
•
Clean the electrodes.
•
Put burner cap on burner head.
•
Align burner base.
After burner ignites, turn knob to
desired setting; if burner still clicks,
contact service technician.
See Pg. 89.
Clean the burner components, see
Pg. 87.
English 99
2023-02-23 오후 5:09:16
2023-02-23 오후 5:09:16
Publicidad
