Master Trimmers PROFESSIONAL MT Tumbler 800 Manual De Uso Y Mantenimiento página 37

2. Remove the inlet hopper, shown in red in the following picture, and clean it to remove any product residues
present in it.
The input hopper is an optional accessory. The MT Tumbler 800 & 800 MED are available as
standard without the input hopper. Please consult the MASTER PRODUCTS sales department
if you foresee the need for it.
3. Open the upper protective flap by first operating the handle as shown in the following illustrations and then lifting
it upwards using the two fixed handles.
4. With the help of another user, hold the barrel by the ends, remove it from the inside of the machine and place
it vertically on the floor. If a hydro-cleaning machine is used for cleaning, it is important that it does not work at
excessive pressure as this can damage the barrel. It is important to clean the barrel on both sides, the inside and
the outside.
www.masterproducts.es
37