Operating The Menu; Program Memory Management - Solter aeroprocess 2000 Manual De Instrucciones

OPERATING THE MENU

PROGRAM MEMORY MANAGEMENT

the action by pressing the same selector.
The recovered data can be edited and will be saved as the current program, but the original program in the memory
will not be changed, being safeguarded from accidental changes.
DATA MENU
Enter menu mode and select
the worked hours of the machine.
The wire consumption data
option from the menu. If you don't reset the value manually, this value will be reset automatically when it arri-
ves to 600m.
The operating time value
this time meter increases with the real welding time.
SOLTER
SOLDADURA S.L.
To access the machine menu press key (17)
The first option of SET menu is displayed. From this point, with the
main selector (19), select the desired menu.
Once the desired option appears, press the main selector to access
the different parameters of the selected menu, allowing to check the
value or change it (press the main selector to modify the value (flas-
hing mode) + press again the main selector to confirm the new
value). To exit the menu from any position, use the 17 key.
The changes made are automatically saved and will be in effect until
they are changed. If we want to save the data in a given program,
proceed according to the operation of the program memories.
. In this menu, we have the possibility to read the wire consumption data and
will be displayed in m and cm. You can reset this value at any moment using the
is displayed in hours and minutes (hhhh.mm) and cannot be reset. The value on
Example: 71h 30 minutes
AEROPROCESS
The machine can store any program in memory
with all data, both primary and secondary.
To manage the reading/writing of these programs,
select the program menu (enter menu mode and
select "Pro"). After that, you can choose between
the options "read a program (L-P)" or "save a pro-
gram (S-P)". Having selected the option, select the
program number with the main selector and confirm
.
12