Operating The Front Panel - Solter aeroprocess 2000 Manual De Instrucciones

OPERATING THE FRONT PANEL

A - Selector of welding type: This button lets you choose between the different types of welding offered by the ma-
chine. The selector is sequential, so each time the button is pressed, a new type of welding is selected (see next pic-
ture)
B - Selectors of material and wire diameter: Only available in MIG mode. This buttons let you select between different
material options (see the sticker on the inside of the winder for details). When you change material or diameter,
the SYN mode is always activated by default.
C - Selector of synergic (automatic) mode or manual mode: For optimum welding quality, you are recommended to
select the synergic mode (in this mode, the welding voltage is always right for the speed you select, allowing a little
adjustment of arc height parameter). In MANUAL mode, you can adjust the welding voltage and speed indepen-
dently.
ATTENTION
In MANUAL mode, the machine could be set in a non proper way.
D - Main panel displays: These displays show all the values selected (welding variables, menu options, and the cu-
rrent and voltage values of the welding process).
E - Main selector: With this selector you can select menu options and set the values of the different parameters. The
value that can be modified always appears in flashing mode.
F - Menu button: With this button you can enter and exit the advanced parameter setting menu.To move or change a
menu option, use the selector E.
G- Button of manual feeding: Only available in MIG mode. It allows us to thread the wire into the torch to prepare the
equipment. When pressed, the indication "inc" and the threading speed (which may change with the E selector) are
displayed.
H - Machine status indicator: This part displays several indications (alarms, overheating or machine operating)
SOLTER
SOLDADURA S.L. AEROPROCESS 10