Section V. Care Ofyour Machine; Clean The Hook Race And Feed Dogs; Inserting The Bobbin Case - Kenmore 385.19606 Manual De Instrucciones

SECTION V. CARE OFYOUR MACHINE
Clean the Hook Race and Feed Dogs
(_ Screw driver
@ Set screw
® Needle plate
@ Lint brush
® Hook race
@ Bobbin holder
Feed dogs
® Soft, dry cloth
Press the Up/down needle position button to raise the
needle, then unplug the sewing machine.
Do not dismantle the machine other than explained on this
page.
Remove the cover plate by sliding the cover plate
button to the right. Take out the bobbin. Brush
and lint. (You may also use a vacuum cleaner.)
[] Remove the set screw on the left
needle plate with the screwdriver
machine. Remove the needle plate .......
[]Takeoutthebobbin. Lift up the_ _i holderand
remove it. .....
[] Clean the cloth. ....
[] Clean the and hook:ra _:with the lint brush.
[] Clean the ce_i ihe hook _§ ith a dry cloth.
*Youmayalso_ _:_ i _er.
* This machine do_ _:_ _i:_ oiling.
f
[]
[]
[]
Inserting the bobbin case
® Bobbin holder
Stopper
® Knob
Needle plate guide pins
® Screwdriver
® Guide holes
[] Insert the bobbin holder so that the knob fits next to the
stopper in the hook race.
[] Insert the bobbin.
[] Attach the needle plate with screw.
After cleaning the machine, make sure the needle
and presser foot are attached.
[]
[] @
®
®
J
146