Round End Buttonhole (Bh 2); Keyhole Buttonhole (Bh 3); Adjusting The Stitch Width And Density; In Buttonholes 2 And - Kenmore 385.19606 Manual De Instrucciones

Tabla de contenido

Publicidad

Round
end Buttonhole
(BH 2)
Stitch pattern: BH2
Thread tension dial: AUTO
Foot: Automatic buttonhole foot R
* Sewing procedure is the same as BH 1.
Starting point
Bartacking
Keyhole
Buttonhole
(BH 3)
Stitch pattern: BH 3 (mode 1)
Thread tension dial: AUTO
Foot: Automatic buttonhole foot R
* Sewing procedure is the same as BH 1
Starting point
Bartacking
Use the eyelet puncher to open the keyhole
buttonhole.
_@Eyelet puncher
BH2
0
Adjusting
the Stitch
Width and Density in
Buttonholes
2 and 3
Adjustment
of the stitch
width
in 8H 2
When you press the zigzag width key, the pre-set
buttonhole width is set for the rounded buttonhole at
4.0. Press "+" or "-" to adjust the stitch width of the
entire buttonhole between 2.5 to 5.5.
Width: 2.5
Width: 4.0
Width: 5.5
Adjustment
of the stitch width
Jn BH 3
When you press the zigzag width key, the pre-set
buttonhole width is set for the keyhole buttonhole at 7.0.
Press "+" or "-" to adjust the stitch width of the entire
buttonhole between 5.5 to 7.0.
Width: 5.5
Width: 6.0
Width: 7.0
To change
the stitch
density
The adjustment of the stitch density is between 0.25 to
1.0 the same as BH1. (refer to page 80)
82

Publicidad

Tabla de contenido
loading

Tabla de contenido