Sewing Button - Kenmore 385.19606 Manual De Instrucciones

Sewing Button
Stitch pattern: #4 (mode 1)
Thread tension dial: AUTO
Foot: Satin stitch foot F
Feed dogs: Lowered (see page 24)
4
Match the holes on the button with the horizontal slot on
the presser foot.
Lower the foot to hold the button in place.
Turn the handwheel by hand until the needle point is
just above the button.
Press the stitch width key "+" or "-" so the needle will
enter the left hole of the button.
Turn the handwheel by hand until the needle shifts to
the right. Press the stitch width key "+" or "-" so the
needle will enter the right hole of the button.
Stitch several times.
After you finish sewing, cut the threads but leave 3" to
4" of thread at the bottom
With a hand sewing needle, draw the top thread to the
reverse side of the fabric and knot the threads.
* After the button sewing is completed, raise the
feed dogs for normal sewing.
72