Adjusting The Stitch Width And Density In; Buttonholes - Kenmore 385.19606 Manual De Instrucciones

Adjusting the Stitch Width and Density in
Buttonholes
To change the stitch width
The stitch width key controls the stitch width.
The pre-set buttonhole widths are: square buttonhole
5.0, rounded buttonhole 4.0, keyhole buttonhole 7.0.
Press "+" or "-" to adjust the stitch width of the entire
buttonhole, ranging between 2.5 to 7.0 depending on
the selected buttonhole.
Narrower width
Wider width
To Change the Stitch Density
The stitch length key controls the stitch density.
The pre-set density varies from 0.45 to 1.5 according to
the buttonhole selected
Press "+" or "-" to adjust the stitch density of the entire
buttonhole between 0.25 to 1.0 depending on the
selected buttonhole.
Denser stitch
Coarser stitch
LENGTH
80