Publicidad
Idiomas disponibles
Idiomas disponibles
EN
PRODUCT DESCRIPTION
POPIS VÝROBKU
1
Hose holder
2
Telescopic tube
1
Držadlo hadice
3
Floor attachment
2
Teleskopická trubka
4
Flexible hose
3
Podlahová hubice
5
Power cord winding button
4
Ohebná hadice
6
ON/OFF button
5
Tlačítko navíjení kabelu
7
Container with cyclone unit
6
Tlačítko vypínače
8
Carrying handle
7
Prachová nádoba s cyklónovou jednotkou
9
Air discharge filter
8
Držadlo pro přenášení
9
Filtr výstupu vzduchu
6
6
9
9
5
5
4
4
1
2
1
2
VP 5 075
46
VP 5 075
EN
CZ
ACCESSORIES
Příslušenství
A
Slotted nozzle
A
Štěrbinová hubice
8
8
7
7
3
3
A
A
VP5076
45
EN
OPERATING MANUAL
ASSEMBLY OF THE VACUUM CLEANER
NOTE
Before fixing or removing accessories, always pull the plug out of the electrical socket!
1.
Connecting the flexible hose to the appliance
Insert the flexible hose into the appliance's air suction inlet.
Turn until you hear a clicking sound, which indicates that the correct
position has been reached.
For removing the flexible hose, turn back and remove the hose (Fig. 1).
When the slide throttle is closed, the air flow is stronger.
Slide throttle in open position – weaker air flow.
2.
Attaching the telescopic tube to the hose adapter
Put the telescopic tube on the hose adapter and turn it slightly.
3.
Extending the telescopic tube
Press the plastic latch and pull the smaller tube outwards.
4.
Fixing the floor attachment to the telescopic tube
Insert the telescopic tube into the floor attachment and turn it slightly.
The flap (Fig. 2) is used for setting the floor attachment to brushing (for
smooth floors), or to smooth vacuuming (for carpets).
ACCESSORIES
A
Slot nozzle
The slot nozzle adapter is used for vacuuming places that are difficult to access, such as radiators, slots,
corners, pedestals, spaces between upholstery, and others.
USING THE APLIANCE
NOTE
Before using the appliance, make sure that filters and the dust container are properly positioned and mounted.
Unwind the supply cable length you need. The yellow mark on the supply cable indicates the optimum cable
length. Do not unwind the supply cable beyond the red mark!
1.
Insert the plug into the mains outlet.
2.
Press the main switch on the vacuum cleaner.
3.
After vacuuming, turn off the product and unplug from the mains outlet.
4.
To wind the power cord, press the power cord winding button .
Use your other hand to make sure the power cord does not whip around.
VP5076
46
5
EN
F ig . 1
F ig . 2
VP 5 075
47
Publicidad
