HOMCOM A91-132 Manual De Instrucciones página 53

Assembly instructions
Step 3
Carefully slide Weight plates (42) down Guide rods (18).
Important:
The deep grooves on the Weight plates (42) MUST be on the underside.
( 13 )
Insert the Select rod
down
the Select rod(13)
(34) and Pin (35)
on
sit
Put the Cover ring(36) on the top of the Select plate(41).
Slide Select plate (35) down Guide rods (18).
When using: Select the desired training weight by inserting the Weight select pin (39) into the deep
grooves under the Weight plates and into the Select rod.
When not in use: Insert the Weight selection pin (39) into
stabilizer (4).
Rear
2
34
35
down through the centre holes of the weight stack. Slide the Plate support (34)
and attach it to the first hole from the top with the Pin (35). Ensure the Plate support
the top Weight plate
(42)
.
the hole on the Rear bracket(19)attached to the
.
9
36
41
13
39
42