Husqvarna 565 Manual Del Usuario página 9

Throttle trigger lockout
The throttle trigger lockout is designed to prevent
accidental operation of the throttle trigger. When you
press the throttle trigger lockout down (A) (in example
when you grasp the handle) it releases the throttle
trigger (B). When you let go of the handle, the throttle
trigger and the throttle trigger lockout both return to their
default positions. This design locks the throttle trigger at
idle setting.
A
Chain catcher
The chain catcher is designed to catch the chain if it
snaps or jumps off. This should not happen if the chain
is properly tensioned (see instructions under the
To tension the saw chain on page 31 ) and if
heading
the bar and chain are properly serviced and maintained
(see instructions under the heading
saw chain on page 29 ).
Right hand guard
Apart from protecting your hand if the chain jumps or
snaps, the right hand guard stops branches and twigs
from interfering with your grip on the rear handle.
Vibration damping system
Your product is equipped with a vibration damping
system that is designed to minimize vibration and make
operation easier. The product's vibration damping
system reduces the transfer of vibration between the
engine unit/cutting equipment and the product's handle
359 - 002 -
B
Sharpening of the
unit. The body of the chainsaw, including the cutting
equipment, is insulated from the handles by vibration
damping units.
Cutting hardwoods (most broadleaf trees) creates more
vibration than cutting softwoods (most conifers). Cutting
with cutting equipment that is blunt or faulty (wrong type
or badly sharpened) will increase the vibration level.
WARNING: Overexposure to vibration can
lead to circulatory damage or nerve damage
in people who have impaired circulation.
Contact your doctor if you experience
symptoms of overexposure to vibration.
Such symptoms include numbness, loss of
feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or condition.
These symptoms normally appear in the
fingers, hands or wrists. These symptoms
may be increased in cold temperatures.
Start/stop switch
Use the start/stop switch to switch off the engine.
Muffler
The muffler is designed to keep noise levels to a
minimum and to direct exhaust fumes away from the
user.
WARNING: The exhaust fumes from the
engine are hot and may contain sparks
which can start a fire. Never start the
machine indoors or near combustible
material!
In areas with a hot, dry climate there is a high risk of
fires. These areas are sometimes subject to government
9