MSW Motor Technics MSW-MOE-G-1.5 Manual De Instrucciones página 40

A. Spark plug
B. Carburetor
C. Air filter housing
D. Fuel tank
E. Fuel tank cap
F. Manual choke cable
G. Engine oil filler cap and filler plug with dipstick
H. Silencer
I. Starter cord
3.2.
Preparation for work
LOCATION OF THE DEVICE
The ambient temperature must not exceed 45°C. Use the device only in well-
ventilated, open areas. Do not obstruct the appliance's exhaust outlet. Keep the
device away from fire or heat
Before installation, it is important to ensure that the motor is suitable for the vessel,
i.e. that its parameters correspond to the vessel's propulsion requirements.
Otherwise the behaviour of the propelled vessel may be unstable.
INSTALLING THE DEVICE (see picture below)
The MSW-MOE-G-1.5 model is delivered almost ready to use, while in case of the
MSW-MOE-G-2 .5 and MSW-MOE-G-6.5 models the propeller gearbox must first be
connected to the motor with the supplied socket head cap screws and washers
before use. Screw in the screws in diagonal order and tighten them progressively.
sources.