Descargar Imprimir esta página

Angelo Po 0S0FR3E Manual De Uso página 152

Freidora eléctrica

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ENGLISH
WARNING: Before commissioning the
appliance, the system must be tested to as-
sess the operating conditions of every sin-
gle component and detect any anomalies.
At this stage, it is important to check that all
health and safety requirements are strictly
adhered
to.
The following checks should be carried out to
test the system:
Check that the mains voltage is the same as
1)
that of the appliance.
INSTRUCTIONS AND WARNINGS FOR ADJUSTMENTS
The appliance main functions do not require
any special adjustments by qualifi ed staff ex-
cept for the settings made during use.
INSTRUCTIONS AND WARNINGS FOR PART REPLACEMENT
The appliance does not require the replace-
ment of operating components by qualifi ed
staff except for the replacement of standard
parts, which can be carried out by the user.
APPLIANCE DECOMMISSIONING, SCRAPPING AND DISPOSAL
When decommissioning the appliance, a set
of procedures should be carried out to ensure
that the appliance and its components are not
a hindrance and are not easily accessible.
To prevent the appliance from posing risks to
people or the environment, disconnect and
disable all energy sources (electricity, etc.), and
drain any liquids (lubricants, oils, etc.).
Place the appliance in a suitable and not easily
accessible area, with barriers to prevent anyone
from accessing it.
14
TESTING THE APPLIANCE
ADJUSTMENTS
PART REPLACEMENT
Operate the automatic switch-disconnector
2)
to check the connection to the power supply.
Check that the safety devices are operating
3)
correctly.
If necessary, after testing, train the user proper-
ly by providing all skills required to safely com-
mission the appliance, in accordance with ap-
plicable legal requirements.
When scrapping, sort all components by chem-
ical characteristics and dispose of them sepa-
rately in accordance with the relevant applica-
ble laws.
IMPORTANT
biodegradable materials, lubricating oils
and non-ferrous metal components (rubber,
PVC, etc.) in the environment. Dispose of
them in accordance with the applicable laws.
ADJUSTMENTS
:
Never dump non-
3413910_inst_GB_rev.1

Publicidad

loading

Este manual también es adecuado para:

1s0fr4e0s1fr3e1s1fr4e