Daub D/ Cross Slicer 202 Manual De Usuario página 41

3.3. Safety instructions
WARNING
6
For correct use and prolong lifespan it is important to read our manual and to comply with
the suggestions, recommendations and / or regulations when unpacking, installing, using and
maintaining the machine. If the machine is sold on, this manual should be handed over to the new
owner.
3.3.1. Transport and storage
WARNING
6
• Do not load anything on the top of the packing.
• The machine should always be transported upright.
• Transport damage caused by not having followed above-mentioned regulations cannot be
claimed. Moreover transport of goods is always at the buyers risk, unless explicitly agreed
otherwise.
3.3.2. Installation
WARNING
6
• Out of safety considerations it is advisable to keep enough distance when lifting the machine.
• Be sure the machine is placed on a flat floor.
• Install the machine in a well-ventilated area to prevent the accumulation of unacceptable
concentrations of particles harmful to health.
• Have the machine installed by qualified personnel.
• Do not adjust parts the manufacturer has sealed with paint. Have these parts adjusted by
qualified personnel.
• Do not use extension leads to connect the machine to the mains.
3.3.3. Commissioning
WARNING
6
Only qualified employees older than 16 years may operate the machine.
3.3.4. Use
WARNING
6
• Never put your hands in the working area of the machine.
• Do not use bread that contains metals, stones or other foreign objects.
D\ Cross Slicer 202 | User manual
41
www.daub.nl