Daub D/ Cross Slicer 202 Manual De Usuario página 47

6. COMMISSIONING
6.1. Safety instructions
WARNING
6
Carefully read the safety instructions in section 3. before commissioning the machine. This will
prevent possible personal injury or damage to the machine.
6.2. Switching on the machine
Switch on the machine by inserting the plug into the wall socket.
6.3. Checklist
• Check if it is necessary to clean the machine because of possible transport dirt.
• Check that the voltage on the type plate matches the available mains voltage.
• Be sure the machine is placed on a solid and flat floor.
D\ Cross Slicer 202 | User manual
47
www.daub.nl