Daub D/ Cross Slicer 202 Manual De Usuario página 53

ATTENTION
• Make sure the upper belts are in the centre of the band guide.
• Make sure the lower belt are in the centre of the band guide.
Figure Placing the felt blocks
i
12. Place the felt blocks between the knife holder and the upper belt. See figure 17.
13. Place the felt blocks between the knife holder and the lower belt. See figure 17.
14. Turn the knife bolts clockwise, alternating between them, to tension the knives.
15. Remove the felt blocks between the knife holder and the lower belt.
16. Remove the felt blocks between the knife holder and the upper belt.
17. Check the tension of the knives. The knives must have the same tension as before replacement.
18. If necessary, turn the knife bolts anticlockwise or clockwise to adjust the tension of the knives.
19. Fit and tighten all the parts in reverse order.
20. Switch the machine on by reinserting the plug into the wall socket.
D\ Cross Slicer 202 | User manual
53
www.daub.nl