Daub D/ Cross Slicer 202 Manual De Usuario página 52

Figure Adjusting knife tension
y
7. Turn the two bolts of the top shaft, at the left and right ends of the frame, three turns
anticlockwise to loosen the top shaft. See figure 15.
Figure Relieving the tension from the knives
u
8. Turn the four knife bolts on top of the frame anticlockwise, 4 x 4 turns, to relieve the tension
from the knives. See figure 16.
9. Replace the knives.
ATTENTION
To keep the knife holders in place, do not replace the knives in the outermost positions (two per
side).
10. Turn the knife bolts clockwise, alternating between them, to tension the knives.
11. Position the knives perpendicular to the knife guide. The distance between the knives should
be the same.
D\ Cross Slicer 202 | User manual
3×
4×
4×
4×
4×
52
www.daub.nl