Bobike Go Maxi Carrier Manual De Instrucciones página 20

rear bicycle safety seat for carrier mount
A. Main seat
B. Retention system harness
B1. Safety buckle
B2. Height strap adjusters
B3. Central strap adjusters
B4. Retention system adjustment hole
C. Safety belt for bicycle frame
C1. Safety belt buckle
C2. Safety belt retainer
D. Center of gravity
• This child bicycle seat must not be mounted in
folding bicycles.
• This child bicycle seat must not be used on speed
pedelecs above 25 km/h / 15,5mph.
• This child bicycle seat must not be mounted to
bicycles fitted with rear shock absorbers.
• This child bicycle seat must not be mounted to
motorized vehicles such as mopeds, scooters.
• The child bicycle seat must be assembled on a
carrier with a load capacity of 27kg, according to the
EN ISO 11243:2016 standard.
• The maximum weight applied to the carrier cannot
exceed 27kg, according to the EN ISO 11243:2016
standard
• For safety reasons this seat shall only be fitted
to luggage carriers in accordance with EN ISO
11243:2016 - 120 to 175 mm. Note: This seat also fits
wider carriers – 185 mm.
• The child bicycle seat must be assembled on
bicycles with wheels with diameters of 26" and 29".
• This child bicycle seat is only suitable for carrying
children with a maximum weight of 22 Kg, and a
maximum height of 110 cm, (and children with
recommended ages ranging from 9 months to
6 years of age - with the weight and height as the
decisive variable).
Specific Instructions for Mounting the Seat in the Bicycle
1. Unscrew the hand knob (G1), while simultaneously
lifting the security ring (G2). Open the jaw (G3) to an
aperture wider than the luggage carrier.
Go® Maxi Carrier
with or without reclining system
Table of Contents of Product
Specific Instructions For Mounting
EN.
E. Footrest
E1. Footrest lever
E2. Footrest peg
E3. Footrest strap
F. Traceability information
G. Carrier mounting system
G1. Hand knob
G2. Safety ring
G3. Jaw
H. Reclining button
• The total weight of the cyclist and the child
transported must not exceed the maximum
permitted load permitted for the bicycle. Information
on the maximum load can be found in the operating
instructions of the bicycle. You can also contact the
manufacturer for this question.
• This child bicycle seat can be used on E-bikes and
Speed Pedelecs up to 25 km/h / 15,5mph.
• The seat may only be mounted on a bicycle suitable for
the attachment of such additional loads. Please consult
your bicycle or lugagge carrier instructions manual.
• The position of the child bicycle seat must be
adjusted so that the bicycle rider does not touch the
child bicycle seat with the feet when in motion.
• It's very important to adjust correctly the seat and
its component parts for optimum comfort and safety
of the child. It's also important that the seat does not
slope forward, so that the child does not tend to slide
out of it. It is also important that the backrest slope
backward slightly.
• Check if all parts of the bicycle function correctly
with the child bicycle seat mounted.
• Check the instructions of the bicycle, and If you
have any doubts on fitting the child bicycle seat to
your bicycle, please contact your bicycle supplier for
further information.
2. Pull the safety belt for the bicycle frame (C)
upwards. Make sure it does not interfere with
mounting the seat to the bicycle.
20