Publicidad
.111$
,,if ,.
,, ; ii
DECK 1/2
00
b
DUBBING THE WHOLE TAPE
When an original tape is dubbed onto another tape rated at the
same recording time, the back side of the recording tape may not
bean exact duplicate of the back side of the original tape.
This is because there are differences in actual recording times
between tapes, since each tape has a bit more time than indicated
on the label. This time varies with each brand.
This unit's STSD function allows you to make exact copies of both
sides of the original tape.
1
2
3
Press the TAPE/DECKl/2
button.
If a tape is inserted
When pressing the TAPE/DECKl/2
button with the power off,
play begins by the direct play function. Press the
button to
stop playback.
Insert the original tape into deck 1 and the tape to
be recorded on into deck 2.
Press the EJECT A marks to open the cassette holders.
Insert the tapes, with the sides to be played back or recorded
first facing you and the exposed sides down.
Press one of the SYNCHRO
DUBBING buttons to
start recording.
@To dub at normal speed: Press the NORMAL button.
N-DUB is displayed.
@To dub at high speed: Press the HIGH button.
H-DUB is displayed.
The tapes are rewound to the beginning of their front sides, and
then recording starts. After the recording of the front side ends,
the back sides of both tapes will start at the same time as soon
as the longer tape has been reversed (STSD function).
To stop dubbing in the middle
Press the 9 button.
Regardless of whether the 00 NR indicator is displayed or not, the
Dolby NR system does not affect the recording.
Recording is inhibited if the erasure prevention tab on either side
of the tape is broken off.
If the leader segment of the dubbing tape is longer than that of the
original tape, recording on the back side may stop midway
through the recording.
In this case, dub each side manually
following the procedure in "RECORDING FROM TAPE TO TAPE
MANUALLY".
50
Publicidad
