Descargar Imprimir esta página

Aiwa NSX-999 Manual De Instrucciones página 64

Ocultar thumbs Ver también para NSX-999:

Publicidad

7
POWER
o
6 STANDBY/ON
b
SLEEP
T
2
"?" E
b
64
SETTING THE TIMER
6
7
Adjust the volume and tone.
Press the POWER button to turn the unit off.
Check whether
Q or ~$c is displayed,
and the function buttons
turn off (timer
standby
mode).
When
the timer-on
time
is
reached, the unit is turned on and play begins using the selected
source.
To cancel timer standby mode temporarily
Press the TIMER button on the remote control so that ~
or ~~c
goes out in the display.
To restore timer standby mode, press the TIMER button to display
~
or ,$c.
Using the unit while the timer is set
You can use the unit normally
after setting the timer.
Before turning
off the power,
repeat steps 5 and 6 to select the
correct sources and volume.
To change the specified time and source
Carry out all the steps again.
To check the specified time and source
Press the TIMER button on the remote control.
The timer-on
time
and the selected
source
name
are displayed
for 4 seconds.
However,
the duration
for the timer-on
period is not displayed.
Timer
playback
and timer
recording
will not begin
unless the
power is turned off.
Connected
equipment
cannot be turned on and off by the built-in
timer of this unit.
Use an external timer.
SElllNG THE SLEEP TIMER
(Operating with only the remote control)
The sleep timer automatically
turns the unit off after the specified
time passes.
1
2
Press the SLEEP button.
SLEEP
0,
@ and 60 @ are displayed.
SLEEP @ and@
go out in 4 seconds, and the sleep timer star-ts
to work, The power is automatically
turned off after 60 minutes.
If you wish to change this time, go to step 2 before SLEEP
@)
and @ go out.
Press the 4
DOWN or *
UP button to soecifv
the time until the power is turned off.
;
-
Each time the button is pressed, the time changes
between
10
and 240 minutes
in 10-minute
steps.
The specified
time @ is displayed.
To check the time remaining until the power is turned off
Press the SLEEP button once. The remaining
time is displayed
for
4 seconds.
To cancel the sleep timer mode
Press the SLEEP button twice so that SLEEP
in the display goes
out.

Publicidad

loading