Publicidad
SPECIFICATIONS
cFM section>
Frequency range
87.5 MHz tO 108 MHz
Usable sensitivity (IHF)
1.3 pV (75 ohms) 13.2 dBf
Alternate
channel
selectivity
50 dB (t400 kHz)
Signal-to-noise
ratto
Harmonic distortion
Frequency response
Stereo separation
Antenna
cAM section>
Frequency range
Usable sensitivity
Selectivity
Signal-to-noise
ratto
Antenna
<Timer section>
Program timer
Sleep timer
<Amplifier section>
Power output
Hsrmonic distortion
Input terminal
Output terminal
cCassette deck section>
Track format
Frequency responss
Signal-to-noise
ratio
Tape speed
Recording system
Erasure system
Motor
Heads
STEREO: 70 dB
MONO:
76 dB
0.3 % (MONO), 1 kHz
0.5
Yo
(STEREO, L-R), 1 kHz
30
HZ
to 15 kHz (+0.5 dB, – 3 dB)
33 dB at 1 kHz
75 ohms (unbalanced)
530 (531) kHzto 1710 (1602) kHz
350 kVlm
22 dB (9 kHz)
53dB(100
dB input)
Loop antenna
On-timer, free setting
Setting in 1O-minute increments,
240 minutes maximum
FTC RULE
120 watts per channel, Min.
RMS at 6 ohms, from 40 Hz to 12
kHz, with no more than 1% Total
Harmonic Distortion
0.1 % (85 W, 1 kHz, 6 ohms, DIN-
AUDIO)
VI DEO/AUX: 150 mV (adjustable)
MIC: 1.0 mV/10 k.Q
SUPER WOOFER :2.7 V
4 tracks, 2 channels
CrOz tape: 50 – 16000 Hz
Normal tape: 50 – 15000 Hz
60 dB (DOLBY NR ON, CrOz tape
peak level)
4.8
CnIk+W.
(1718
ips)
AC bias
AC erase
DC servo motor x 1
Playback head x 1 (deck 1)
Recording/playbacklerasure
head
x 1 (deck 2)
72
Publicidad
