Publicidad
.0--
.
CARE AND MAINTENANCE
Occasional
maintenance
of the unit and care of the unit and care
of the software are needed to optimize the performance
of your unit.
To clean the cabinet
Use a soft cloth lightly moistened
with a mild detergent
solution,
Do
not use strong solvents
such as alcohol,
benzine
or thinner.
To clean the heads and tape paths
After every 10 hours of use, clean the heads and tape paths with
a head cleaning
cassette
or cotton swab moistened
with cleaning
fluid or denatured
alcohol.
(These cleaning
kits are commercially
available.)
When cleaning with a cotton swab@,
wipe the recording/playback
head
@, erasure
head
@ (deck 2 only),
pinchrollers
@, and
capstans
@. +
m
After cleaning the heads and tape paths with a liquid head cleaning
cassette
or a moistened
swab, wait until the cleaned
parts are
completely
dried before inserting
tapes.
Care of discs
Before playing a disc, wipe it from the center out with a cleaning
cloth. +
After playing a disc, store it in its case.
Do not leave the disc in
places that are hot or humid.
Care of tapes
Store tapes in their cases after use.
Do not leave tapes near magnets,
motors, television
sets, or any
source of magnetism.
This will downgrade
the sound quality and
cause noise.
Do not expose tapes to direct sunlight,
or leave them in a car
parked in direct sunlight.
70
Publicidad
