Publicidad
Idiomas disponibles
Idiomas disponibles
programme for weight saving consisting of two
balancing modes:
optimised mode for fast vehicle
wheels;
or
optimised mode for slow vehicle
wheels;
press the button again to deactivate the
Weight Management suite.
Wheel balancing is performed using the de-
sired balancing programme. At the end of the
spin, if wheel balancing is considered satisfac-
tory, the position indicators will display the
icons
and two semicircular indicators
for indicating the residual rotation torque
unbalance level (left indicator) and static
rotation torque level (right indicator).
2.
selects the required operator:
-
This button can be used to change operator
quickly.
-
3 operators can be selected (1, 2 or 3) and
named (see the "Customisation" section).
-
When a new operator is selected, the machine
resets the parameters that were active at the
last recall.
The stored parameters are:
-
Balancing mode; Dynamic, ALU, etc...
-
Wheel dimensions.
-
Last phase of OPT.
-
General machine settings: grams/ounces,
sensitivity x5/x1, etc...
3.
enable / disable the program ePos Lite
(intelligent positioning):
- To select the wheel to be analyzed directly
press on the wheel on the vehicle to video:
EM9780 plus - EM9780 C plus AutomaticLine - Operator's manual
-
Select the left front wheel;;
-
Select the right front wheel;
-
Select the right rear wheel;
-
Select the left rear wheel;
the press of the button
program iPOS Lite.
After the procedure of acquisition of the data
the program suggests the optimal arrangement
of the wheels on the vehicle.
For more detailed information, refer to paragraph
3.2 of the suite "Wheel Diagnosis Program".
4.
Enables/disables the unbalance display
mode (gx1 or gx5).
-
Select this button to display the unbalance
mass in grams:
to the nearest gram or 1/10 of an ounce
if the unit of measurement has been set to
ounces;
or
to the nearest 5 grams or 1/4 of an
ounce if the unit of measurement has been
set to ounces.
5.
print menu:
-
selecting the following key enters the 'print'
menu of the running program.
In the menu 'you can:
-
fill out the blank fields of the report by pressing
the enter text button
-
start the printing process with the press button
;
-
from the print menu, the PDF file can be
downloaded onto a USB key connected to the
turns off the
UK
;
63
Publicidad
