Carl F. Bucherer HERITAGE CHRONOMETER CELEBRATION Instrucciones página 3

H E R I TAG E
C H R O N O M E T E R C E L E B R AT I O N
LEGEND
Second
Crown
Position 1: Set date
Position 2: Set time
1 2
Date
6 | E N G L I S H
YOUR WATCH
The classic design of the Heritage Chronometer
Celebration emphasizes the functionality of the timepiece,
presenting the important information at a glance: the cur-
rent time and the date at 3 o'clock.
TECHNICAL DATA
Automatic movement CFB 1965.1
Depth of the
movement 3.6 mm
Diameter of the
movement 26.2 mm
Number of jewel
bearings 25
Water resistance * 30 m | 3 bar
* see the chapter on "Water resistance"
START THE WATCH SET TIME
The movement is wound by the motion of the In order for the date to properly move at
wrist when worn. When not worn, the watch midnight, the hour hand must intentionally
stops after at least 42 hours and has to be be set to a.m. or p.m. based on the current
wound manually. time.
1 Manually wind the move- 1
ment by rotating the
crown at least 30 times in
the clockwise direction.
2
3
Pull the crown until it is
in position 2. The second
hand does not move.
Turn the crown until the
date changes. Then delib-
erately set the current
time either a.m. or p.m.
Push the crown back to
the initial position. The
second hand is back in
motion.
E N G L I S H | 7