Publicidad
Idiomas disponibles
Idiomas disponibles
3.
When enough hot water has been prepared, turn the steam control knob
clockwise and the hot water dispensing will stop.
Note: The hot water function can also be used to quickly cool down the coff ee
maker.
CAUTION
Risk of scalding! Be careful of hot device components during use.
This applies in particular to the water outlet (portafi lter), the hot
water nozzle and the steam pipe. Never touch these parts while the
device is in operation.
Heating liquid with steam
The steam nozzle (without frothing device) can be used to prepare hot drinks such
as hot chocolate, water or tea.
1.
Use a stainless steel mug and fi ll it halfway with cold liquid.
Note: The diameter of the cup should be at least 70 ± 5 mm because the liquid
is heated by steam. This prevents liquid from overfl owing or spilling as a result
of the vapour release.
2.
Press the steam button and the device will start preheating. The "single
cup" and "double cup" indicator lights will turn off and the "steam/preheat"
indicator light will fl ash. When the "steam/preheat" indicator light stays on,
preheating is complete.
3.
Place the mug under the steam wand and dip the steam wand into the liquid.
4.
Turn the steam knob anti-clockwise and release the steam.
5.
Turn off the steam knob clockwise when the liquid has reached the desired
temperature. No more steam will come out of the steam nozzle.
Note: Clean the steam nozzle immediately after use.
CAUTION
Risk of scalding! The steam wand and steam nozzle become very
hot during use. Never touch these device Components while the
device is in operation.
EN
41
Publicidad
