Problem
The coffee is running
out at the edge of the
portafilter.
The coffee is coming
out of the device too
slowly or not at all.
Water leaks from the
bottom of the unit.
The espresso
machine does not work.
The steam does not
froth the milk.
Note: If you cannot find the cause of the malfunction, contact a specialist
company and do not attempt to repair or disassemble the device yourself.
Possible cause
There is too much
coffee powder in the
filter sieve
There is coffee
powder in the sealing
ring under the brew-
ing unit.
The above operatio-
nal issues have not
been resolved.
The ground coffee is
too fine.
The filter sieves are
clogged.
The water tank has not
been inserted correctly.
The drip tray is full.
Malfunction of the
espresso machine.
The mains plug is not
correctly inserted in
the socket.
Short circuit in the
temperature sensor
(NTC).
Malfunction of the
espresso machine.
The "steam" indicator
light does not light up.
The milk cup is too
big or the shape is
not suitable.
Low-fat milk was used.
Solution
Turn off the device
and wait for it to cool
down. Clean the filter
screen and then fill in
the ground coffee.
Contact a specialist
company.
Use coarser coffee
powder.
Clean the filter sieve
with a small brush.
Reinstall the water tank.
Clean the drip tray.
Contact a specialist
company.
Insert the mains plug
properly into the socket.
Contact a specialist
company.
Wait for the "steam"
indicator light to
come on.
Use a tall and narrow
milk cup.
Use whole milk.
EN
45