Publicidad
Idiomas disponibles
Idiomas disponibles
Inside view
14
13
12
11
10
9
Fig. 4: Inside view (example: AMEDIO® Profession-
al+ PnC 22)
1
Charging socket *
2
ECU (Electronic Control Unit) *
3
Differential current transformer *
4
Control fuse
5
Surge protection
6
Shunt release *
7
Switching input for downgrade *
8
Ethernet surge protection
9
Terminals for voltage supply
10 Circuit breaker *
11
Residual current device *
12 Energy meter (MID-compliant for three-phase
supply network connection only) *
13 Phase sequence relay *
14 Power supply unit
* One available for each charging point
3.5
The product has various operating modes that can
be changed even during operation.
1
2
"Standalone Autostart"
The product is operated as a stand-alone solution
3
without connection to a backend system. Charging
4
starts automatically as soon as the vehicle is
plugged in.
5
6
"Standalone with authorisation"
7
The product is operated as a stand-alone solution
8
without connection to a master backend system.
The authorisation occurs through RFID cards and a
local whitelist.
"Standalone Backend System"
The product can be connected to a backend sys-
tem via wireless communication or ethernet. The
product is operated via the backend system.
Authorisation is dependent on the backend system,
for example an RFID card, smartphone app or ad
hoc (e.g. direct payment).
"Networked"
Only valid for the networkable product variants.
Several devices are connected via ethernet. This
enables use of local load management and a con-
nection to the Backend-System can be established
for all networked products.
Operating modes
The availability of the individual operating
modes depends on the configuration of the
product.
A detailed description of networking, the
connection to a backend system and load
management, including application ex-
amples, can be found on our website in the
download section for the selected product.
1 "1.1 Website" [
3]
}
EN
9
Publicidad
