Publicidad
Idiomas disponibles
Idiomas disponibles
u Click the "Save" button to save the setting(s).
For connection to a backend system
The configuration in the backend system depends
on the respective backend system and therefore
cannot be described in detail in this document.
1. Read the vehicle ID in the backend system. First
connect the product and the vehicle to the char-
ging cable.
2. Enter the vehicle ID in the backend system or
enter the vehicle ID in the web interface in the
parameter "List of entries in OCPP whitelist" or
"List of entries in local whitelist".
Without a connection to a backend system
1. Read the vehicle ID in the web interface.
u Navigate to the menu "Authorization" > "HLC
15118" and set the following parameters:
Parameter
Setting
15118 Configura-
u Select "On (No PlugN-
tion
Charge)".
u Connect the product and the vehicle to the
charging cable. To do this, use the charging
socket on the left.
u Enter the ending "81/legacy/operator/operator"
in the address line of the web browser (e.g.
192.168.123.123.81/legacy/operator/operator).
u Enter the user name (operator) and password of
the master charging point.
1 Password: See Commissioning data sheet
u Navigate to the menu "> 15118" . The menu
"> 15118" only appears if the parameter "15118
Configuration" is switched on.
u The vehicle ID is displayed under "Event Log-
ger".
u Copy the vehicle ID to the clipboard or note it
down.
2. Enter the vehicle ID in the web interface.
u Delete the ending ":81/legacy/operator/oper-
ator" in the address line of the web browser
(e.g. 192.168.123.123).
u Enter the user name (operator) and password of
the master charging point.
1 Password: See Commissioning data sheet
u Navigate to the menu "Authorization" and set
the following parameters:
Parameter
Setting
List of entries in
u Enter the vehicle ID.
local whitelist
15118 Configura-
u Select "Off".
tion
u Click the "Save" button to save the setting(s).
6.12 Reset the configuration to the factory
setting
The tasks described in this section may only
be carried out by a qualified electrician.
The configurations that affect the master charging
point and the configurations that affect the slave
charging point must be reset separately.
Master charging point
u Enter the ending "81/legacy/operator/operator"
in the address line of the web browser (e.g.
192.168.123.123.81/legacy/operator/operator).
u Enter the user name (operator) and password of
the master charging point.
1 Password: See Commissioning data sheet
u Click the button "Operator Default & Restart" to
restore the factory settings and restart the
product.
Slave charging point
u Enter the ending "82/legacy/operator/operator"
in the address line of the web browser (e.g.
192.168.123.123.82/legacy/operator/operator).
u Enter the user name (operator) and password of
the slave charging point.
1 Password: See Commissioning data sheet
EN
35
Publicidad
