CAMPAGNOLA MASTER Manual De Uso Y Mantenimiento página 39

Symbols and warnings
General warnings
Obligation to read the Use and Mainte-
nance Manual
Obligation to wear ear protectors,
goggles and to protect the head
Do not use the tool in rain, thunder-
storms, adverse weather conditions or
on wet branches
4 ASSEMBLY AND START-UP
Installation
4.1.1 Component installation
•
Remove the harvesting head (11) and prongs (12) from
the container.
•
Insert the prongs (12) with light pressure on the two
supports (13), making sure that the locking teeth have
come out of the support.
•
Connect the connectors (9 and 10) coming out of the
harvesting head (11) and the pole (5) up to the stop,
paying attention to the position of the anti-rotation.
•
Tighten the screws (15) of the clamp on the head (11).
•
Pull the handle (1) and the power cable (16) out of the container.
•
Mount the handle on the pole, connecting the connectors (8 and
10) coming out of the handle clamp and the pole.
•
Tighten the screws (15) of the clamp on the handle (1).
•
Insert the power cable (16) into the slot under the handle.
•
Connect the power cable (16) to the connector (4).
0310.0419 Use and maintenance manual – Instructions
Translation of the Original instructions Rev.: 00, Date 22/06/2023
Adequate clothing is mandatory
Hand protection is mandatory
Obligation to wear safety shoes for
foot protection
Prohibition to use the tool in the
presence of overhead power lines and
to maintain a safety distance of 10 m
from things, animals and/or persons
not involved/object of the activity.
Page 39