CAMPAGNOLA MASTER Manual De Uso Y Mantenimiento página 42

In the case of moving from different sites or for long journeys, in addition to the above (point a-b)are, it is also prescribed
to:
c) disconnect the cord from the battery
d) store the tool in its packaging
CAUTION!
Use the tool only for the purposes described in par. "Product description". Any other use may cause injuries.
Storing
After use, or in the case of long periods of inactivity, it is prescribed to:
•
Follow the procedure for shutting down and securing the tool, above (see paragraph 5.4).
•
Follow all the maintenance instructions in the manual.
Troubleshooting
Troubleshooting can only be carried out by trained personnel who have understood the instructions in this manual and
the accompanying documentation.
Situations that can lead to a failure are normally attributable to a lack of or poor maintenance or a failure of some
mechanical and/or electrical/electronic component of the tool or a situation related to the product being handled.
The following table lists possible faults that can occur on the tool. The "Cause" column shows the cause of the fault
condition.
The "Solution" column shows the corrective action to resolve the fault situation that has occurred.
The manual and/or documentation of the component/equipment must be consulted for a diagnosis of the problems with
the trade equipment supplied.
CAUTION!
All maintenance operations shall be carried out by a Mechanical Maintenance Technician.
FAULT
The tool does not work
The tool does not have adequate
power
Stopping the tool during
use
The tool does not start
Excessive overheating
of the head
Abnormal vibration of combs.
6 MAINTENANCE
Routine maintenance
CAUTION!
•
The tool must be kept in perfect working order at all times
•
All the maintenance operations which are not described in this manual have to be performed in CAT.
•
The routine maintenance operations may be carried out by the operators.
CAUTION!
Use only original Campagnola spare parts for maintenance.
Page 42
CAUSE
Low battery
Low battery level
Max current threshold exceeded
Incorrect assembly of electrical con-
nection between pole/head and/or
pole/handle
Presence of dirt and/or wear
of internal rotating parts
- Wear of rotating parts.
- Incorrect tightening of comb fixing
screws.
Translation of the Original instructions Rev.: 00, Date 22/06/2023
Recharge the battery
Recharge the battery
Check and replace fuse
Dismantle the pole and check that
the connectors are inserted correctly.
Clean and service the head
•
Clean and service the head.
- Screw
0310.0419 Use and maintenance manual – Instructions
SOLUTION
tightening.