Swarovski Optik AX VISIO Serie Manual Del Usuario página 22

The display needs to be in sharp focus to show the information
in the field of view as clearly as possible and achieve ideal
photo quality.
2.7 DIOPTER ADJUSTMENT
To ensure optimum image quality, adjust the focus to compen-
sate for any differences between your left and right eye. To
do this, switch on the AX VISIO (point 3.2) and turn the mode
selection wheel to the compass position (point 3.3).
1. Close the objective lens cover and
1.
leave the left cover open.
2.
2. Turn both diopter adjustment rings counterclockwise as far
as they will go.
Note:
The twist-in eyecup (point 2.4) needs to have been adjusted.
Switching on the device (point 3.2) activates the display.
3. Now look through the right eye-
N
piece with your right eye and turn
132°
N
N
132°
W E the diopter adjustment ring clockwise
N
3.
until the display is sharp. Then com-
pletely remove the objective lens
cover.
42
AX VISIO / EN AX VISIO / DE
N
132°
N
3.
2.
4.
N
4.
132°
N
W E
5.
Note:
Adjust the twist-in eyecups and eye relief precisely so that the
display is more comfortable to view (point 2.4 and 2.5). You
can adjust the brightness of the display to your personal prefe-
rence under "Settings ª Display" in the SWAROVSKI OPTIK
Outdoor app.
2.8 ADJUSTING THE FOCUS
3. OPERATION
3.1 EXPLANATION OF THE BUTTONS
4. Use the focusing wheel to focus
the right channel on a distant object
(keep the left eye closed).
5. Now look at the same object
through the left eyepiece with your
left eye and slowly turn the diopter
adjustment ring clockwise until the
display is sharp (keep the right eye
closed).
Turning the focusing wheel allows
you to focus on any object from the
shortest focusing distance (see techni-
cal data sheet) to infinity.
The release button is used to operate
the main functionality in each appli-
cation. This button has two press
points. Pressing the button halfway
focuses the camera in the selec-
ted functionality, similar to a photo
AX VISIO / EN AX VISIO / DE
43