Swarovski Optik AX VISIO Serie Manual Del Usuario página 27

Battery status indicators
Less than 10%
10% – 24%
25% – 49%
50% – 74%
75% – 100%
Error indicator – Restart
In the event of an unforeseen error
that requires the device to be restar-
ted, the graphic shown here will
appear on the display. To restart the
device, press and hold the ON/OFF
button for five seconds. The device
will then automatically restart.
Factory reset
To perform a factory reset on the AX VISIO, press and hold
the release button and arrow button simultaneously for at
least 10 seconds. A prompt will then appear on the display
asking if you are sure you want to reset the device. Press the
release button to confirm the reset. To stop the process, press
the arrow button.
YES NO
Factory Reset
52
AX VISIO / EN AX VISIO / DE
Factory Reset
Performing factory reset
Note:
Before carrying out a factory reset, please save your photos
and videos on your smartphone. The reset will delete all data
from the device.
LED status indicators
LED indicator
Flashing green
Permanently green
Permanently yellow
Alternating green/yellow
Flashing blue
Flashing red
LED error indicators
LED indicator
Permanently red
Alternating red/yellow
Alternating red/blue
AX VISIO / EN AX VISIO / DE
What it means
The AX VISIO has been switched on
and is starting up
The AX VISIO is ready to use
The AX VISIO is in standby mode
Storage space on the AX VISIO is
full – open the SWAROVSKI OPTIK
Outdoor app to transfer files
Operating system update is in
progress
Battery status low (<10%)
– please charge the battery
What it means
Critical operating system error –
please restart the device.
Operating temperature too high
(>50°C/122°F) or device
overheating (battery, system)
Operating temperature too low
(< –10°C/14°F)
53