Swarovski Optik AX VISIO Serie Manual Del Usuario página 25

4. To take the photo, press the release button all the way and
then let it go. A brief animation appears in the field of view
to confirm the capture.
5. The photo is now saved on the AX VISIO and can be
downloaded using the SWAROVSKI OPTIK Outdoor app.
Camera shake warning:
"Camera shake" means an unintentional movement of the
camera in poor light conditions that occurs when pressing the
release button and results in blurred images.
To prevent camera shake, try to keep the device as steady as
possible (possibly using a support surface or tripod).
RECORDING VIDEOS
To record a video, use the arrow
Kamera (FOTO/VIDEO)
button to switch to the camera's
video mode. A video camera symbol
appears in the status bar.
To start recording a video, press the
release button all the way and then
remove your finger from the button.
The video starts recording and the
recording time is displayed on a
stopwatch. To stop recording, press
the release button all the way again and then remove your
finger from the button. The video is saved and the stopwatch
disappears.
Warning:
If you use the SWAROVSKI OPTIK Outdoor app to start the
live view on your smartphone (point. 3.5), the camera function
must be active on the AX VISIO!
48
AX VISIO / EN AX VISIO / DE
00:00:00
3.4.4 SHARE DISCOVERIES
To share an observation, turn the
mode selection wheel to the appro-
priate position. Then observe the
environment and place the marking
on the chosen point. Press the release
button all the way. As soon as you let go of the button, the
point changes in the field of view. Give the binoculars to a
second person. Arrows then guide this person back to the
marked location. Pressing the release button again will stop
or restart the observation. A shared observation will stop
automatically after 60 seconds.
Note:
For ideal conditions to share an observation, make sure that
the second person is not far from the observation position
when you hand over the AX VISIO.
3.4.5 COMPASS
To start the compass or orientation
guide, turn the mode selection wheel
to the appropriate symbol. The com-
pass direction and tilt angle will then
be displayed. These values update
as you change the observation direction.
You can use the arrow button to choose between three diffe-
rent display options:
1. Compass & Tilt
2. Tilt only
3. Compass only
Compass calibration: to increase the
precision of the compass, we recom-
mend carrying out calibration from
time to time. To do this, switch the AX
VISIO on and turn it evenly on each
axis for around five to ten seconds.
AX VISIO / EN AX VISIO / DE
49