Conformity Declaration - GO2 RH 1 Instrucciones De Uso

GO Manufacturer's terms of warranty
2
1. Case of warranty
The manufacturer grants a warranty for malfunctions in the
appliance which are based on material or production faults. In
addition to this, the statutory warranty claims against the seller
remain valid.
A claim under warranty shall not pertain:
– for parts subject to wear and in cases of natural wear and
tear,
– as a result of using parts that are not original GO
the units,
– if the manufacturer's installation and operating instructions
are not observed,
– as a consequence of improper handling,
– as a consequence of improper transport packing.
2. Scope of warranty
The warranty is valid for malfunctions as stated under item 1,
which occur within 24 months after conclusion of the purchase
agreement between the seller and the final consumer. The
manufacturers will make good such defects by subsequent
fulfilment, i.e. at their discretion either by repair or replacement.
In the event of manufacturers providing service under warranty,
the term of the warranty shall not re commence anew with re-
gard to the repaired or replaced parts; rather, the old warranty
period shall continue to run. More extensive claims, in particu-
lar claims for compensatory damages by purchasers or third
parties, shall be excluded. This does not affect the rules of the
product liability law.
Additional costs based on complicated removal and installation
conditions of the appliance (e.g. removal of furniture or parts of
the vehicle body) do not come under warranty.
Rollers carry 24 months warranty against manufacturing de-
fects. Take care to remove sharp stones from your tyres prior
to using your maneuvering assistant.
3. Raising the case of warranty
In the event of a warranty claim, please contact the company
from whom you purchased the product.
Please present your original receipt of purchase.
14

Conformity Declaration

1. Manufacturer master data
Name:
Address:
2. Equipment identification
Model / Version:
Mover / RH1
parts in 3. Complies with the requirements of the following
2
EC directives
3.1 R&TTE directive (1999/5/EC)
3.2 EMC directive (2004/108/EC)
3.3 Interference suppression in motor vehicles
72/245/EEC (and supplements)
3.4 Machinery Directive 2006/42/EC
3.5 End of Life Vehicles (2000/53/EC)
and bears the type approval number e1 03 4473 and the
CE symbol.
Mover RH1:
Class 1, frequency 868 MHz.
Countries:
AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,
IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.
4. Basis of proof of conformity
EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),
EN301489-1:2005, EN301489-3:2002 (EMC art. 3.1b),
EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,
EN55022:2003 (Class B), ISO 7637-2:2004, EN60950:2001,
2004/104/EC, 2006/28/EC, 2006/42/EC, 2000/53/EC
5. Monitoring body
Federal Office for Motor Traffic
6. Information concerning position of undersigned
Signature: Dr. Schmoll
Executive Manager, Technology
Maneuvering assistant RH1
Truma Gerätetechnik GmbH & Co. KG
Wernher-von-Braun-Str. 12, D-85640 Putzbrunn
Putzbrunn, 26.11.2010