Welby ABO 523 Manual Del Usuario página 30

System settings
Using a power supply unit
The blood pressure monitor can also be operated
with a power supply unit (not included in the
package contents). The use of a medical power
supply unit (DC 6.0 V, 600 mA) is prescribed. The
adapter connection pin must be positive inside
and negative outside with a 0.08" (2.1 mm) coaxial
joint.
1. Connect the output plug of the power supply unit (not includ-
ed in the package contents) to the power plug jack
2. Connect the power supply unit to a socket.
System settings
The system settings allow you to select users, and set date,
time and time format.
1. Push the SET button
A user icon ( or )
2. Push the M button
icon 2. This allows up to two users to save and accumulate
the test results (60 memory slots per user).
3. Push the SET button to confirm the setting. A message " "
(year) will show on the display.
4. Push the M button to set the year and then push the SET
button to confirm.
5. Repeat steps 3 to 4 to set the month, date, hour time and
minute time.
20
The date
corner of the display.
6. After the minute time is set, push the M button to select 12-
hour time format or 24-hour time format.
30
8
.
27
will show on the display
6
to select either user icon 1 or user
21
and time are shown at the lower left
12 .
5
.