Welby ABO 523 Manual Del Usuario página 38

Performing a measurement
8. Once the measurement is complete, the air will be released
from the cuff.
The indicator for systolic pressure
and the pulse rate
measurements will be read out.
The corresponding indicator for measurement classifica-
tion according to the WHO
chapter "WHO classification").
Deleting or storing measurement results
If the number of measurements exceeds 60 mem-
ory slots per group, the most recent measurements
will appear at first and the oldest measurements
will be deleted as a result.
− If you think the current readings are inaccurate (due to
improper conditions or any other reasons), you can delete
them by pressing the SET button
− If the results are not deleted, they will be automatically stored
into the memory slots of the selected user (see steps 1–3 in the
chapter "Starting a blood pressure measurement").
Deactivation
− Push the START/STOP button
pressure monitor.
− The blood pressure monitor automatically switches off
after 3 minutes.
38
15
18 will be shown on the display. The
25 will also be shown (see
7 to switch off the blood
, diastolic pressure
8 .
16