Welby ABO 523 Manual Del Usuario página 54

Cleaning and maintenance
Cleaning
The blood pressure monitor and cuff must be cleaned before
being passed on to other persons to prevent the transmission
of diseases.
1. Always remove the batteries
monitor before cleaning it.
2. Carefully clean the surfaces of the blood pressure monitor
and the cuff
use) with a soft, damp cloth and a small amount of rubbing
alcohol. Please ensure that no moisture enters the device.
A mild cleaning agent may be used for stubborn dirt.
3. After cleaning, use a soft cloth to dry all parts completely.
4. Let the cuff air dry at room temperature.
Cleaning the cuff
− Clean the surface of the cuff
small amount of rubbing alcohol.
− Wipe the cuff off with a damp cloth (water).
− Let the cuff dry at room temperature.
Changing the batteries
When the low battery indicator
ies 2 according to the steps described in the chapter "Insert-
ing or changing batteries".
Storage
If you do not use the blood pressure monitor for a prolonged
period of time, please observe the following notes:
− The blood pressure monitor doesn't require any mainte-
nance.
54
4 at regular intervals (e.g. after every 20th
2 from the blood pressure
4 with a soft cloth and a
26 shows, change the batter-