Panasonic EYADA Serie Manual De Instrucciones página 16

PREPARATION BEFORE USE
Connecting to Power Supply
ATTENTION
⿟ Before connection, set the forward/
reverse lever to the "○" position to
lock the trigger switch.
⿟ Use only our power supply
(screwdriver cord, power adapter,
and power cord).
Also, do not use the power supply
or cord designed specifically to this
unit to operate other devices.
⿟ When not using the tool for a long
time, you are recommended to
disconnect the power cord from the
outlet. This unit consumes power
even while it is turned off.
Connect the screwdriver
cord to the power adapter
and this unit.
Check the orientation of the
connector and attach it correctly.
Fix it with a joint ring.
Power adapter
(sold separately)
Screwdriver
cord
16
EN
EY9710ADA201.indb EY9710ADA201.indb 16 16
P. 13
Joint ring
Screwdriver cord
Joint ring
(cont.)
Attach the power cord to the
power adapter.
Power adapter
(sold separately)
Power cord
(sold separately)
Check that the power switch
of the power adapter is OFF.
When the power supply is OFF, the
power lamp is off.
Power switch
Connect the power plug to
the outlet.
Example: For Europe
Turn ON the power switch of
the power adapter.
The power lamp lights up green.
Power switch
Power lamp
Power lamp
2023/12/21 2023/12/21 11:53:02 11:53:02