Panasonic EYADA Serie Manual De Instrucciones página 40

NOTIFICATION MENU (n + NUMBER)
n3 Lamp Lighting Pattern Setting
You can set the lighting pattern of
the detection lamp for fastening NG
(NOK) and error occurrence.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "n3" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
40
EN
EYADA_EU.indb EYADA_EU.indb 40 40
P. 22
Lamp lighting pattern
OFF (Off)
Fastening NG (NOK):
Solid red
Other errors:
Blinking red
Fastening NG (NOK):
Blinking red
Other errors:
Solid red
P. 22
n4 Buzzer (Volume) Setting
You can set the buzzer (volume).
* This is a common setting for the
confirmation sound and operation
sound at the time of fastening OK.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "n4" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_2".
Display Buzzer (Volume)
Medium volume
High volume
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
(cont.)
P. 22
OFF (Mute)
Low volume
P. 22
2023/11/01 2023/11/01 16:44:29 16:44:29