Panasonic EYADA Serie Manual De Instrucciones página 21

■ Count-up (Count finished)
The number of fastened screws
determined as OK has reached the set
count quantity.
With a buzzer (a long beep) and the blue
detection lamp, you are notified that the
set number of screws has been fastened
successfully.
• Set the count quantity.
• The lighting colour of the lamp can be
changed in the menu.
• The buzzer pattern can be changed in the
menu.
P. 39
• The buzzer (volume) can be changed in
the menu.
P. 40
OK OK OK
■ Fastening NG (NOK)
The tool has stopped without the clutch
activated not satisfying the determination
criteria.
The buzzer emits a buzz and the
detection lamp lights up in red to tell you
that the screw has not been properly
fastened.
• Pressing the OK button will clear the error
display.
• The lighting pattern of the lamp can be
changed in the menu.
NG
EY9710ADA201.indb EY9710ADA201.indb 21 21
P. 25
P. 39
Detection
lamp
Solid blue
A long
beep
P. 40
Detection lamp
Solid red
Buzz
Finishing Work
Set the forward/reverse
lever to the trigger switch
lock position.
Set it to the "○" position.
Turn OFF the power switch
of the power adapter,
or
disconnect the power plug
from the outlet.
Turn OFF the power switch.
Power switch
Disconnect the power plug from the
outlet.
Power plug
Example: For Europe
○ position
21
EN
2023/12/21 2023/12/21 11:53:03 11:53:03