Panasonic EYADA Serie Manual De Instrucciones página 41

BASIC SETTING MENU (b + NUMBER)
b1 Brake Setting
You can enable or disable braking
when rotation stops before clutch
activation.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "b1" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display
OFF: Braking disabled
( Rotation stops slowly
when you release the
trigger switch.)
ON: Braking enabled
( Rotation stops
immediately when you
release the trigger
switch.)
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
EYADA_EU.indb EYADA_EU.indb 41 41
b2
You can select "Count-up signal" or
"Fastening NG (NOK) signal", as the
external output signal.
P. 45
■ Setting Procedure
P. 22
Brake
P. 22
External-Output Signal Setting
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "b2" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display External-output signal
Count-up signal
Fastening NG (NOK)
signal
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
P. 22
41
EN
2023/11/01 2023/11/01 16:44:29 16:44:29