Panasonic EYADA Serie Manual De Instrucciones página 37

u6 Disable Fastening Time Setting
You can set the tool not to start
during the set time after fastening is
determined as OK.
• When both the "
c6
Time Setting" and the "
Fastening Time Setting" are enabled,
u6
the " Disable Fastening Time
Setting" takes precedence.
P. 30
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "u6" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "0.5".
Display Disable fastening time
EYADA_EU.indb EYADA_EU.indb 37 37
Ignore Count
u6
Disable
P. 22
0.5 s
9.9 s
Fastening OK
Fastening
is executed
during the
set time.
After fastening is determined as OK, the
Electric Screwdriver does not start during the
time set in the Disable Fastening Time Setting.
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
The bit
does not
rotate.
37
EN
2023/11/01 2023/11/01 16:44:28 16:44:28