Panasonic EYADA Serie Manual De Instrucciones página 39

NOTIFICATION MENU (n + NUMBER)
n1 Lamp Lighting Colour Setting
You can set the lighting colour of the
detection lamp.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "n1" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display Lamp lighting colour
Fastening OK: Green
(Count complete): Blue
Fastening OK: Blue
(Count complete): Green
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
EYADA_EU.indb EYADA_EU.indb 39 39
■ Setting Procedure
P. 22
OFF (Off)
Count-up
Count-up
P. 22
n2 Buzzer Pattern Setting
You can set the buzzer pattern for
count-up (count complete).
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "n2" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The default is "_1".
Display Buzzer pattern
A long beep
Three short beeps
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
Back to Operation Mode.
Hold down the OK button.
P. 22
P. 22
39
EN
2023/11/01 2023/11/01 16:44:28 16:44:28