Panasonic EYADA Serie Manual De Instrucciones página 45

Input/Output Signals
Wire Input/
colour Output
Red Output Fastening OK signal
Fastening NG (NOK)
signal
Blue Output
Count-up signal
Yellow Output Motor forward signal
Purple Output Motor reverse signal
Green Input Drive permission signal
Light
－
COM
blue
• Only either one of "Fastening NG (NOK) signal" or "Count-up signal" can be used. Select
either one of them through "
EYADA_EU.indb EYADA_EU.indb 45 45
Signal name
Output when fastening is OK.
(Fixed for 0.5 s)
Output when fastening is NG (NOK).
(Fixed for 0.5 s)
Output when the set count quantity is
completed.
(Fixed for 0.5 s)
Output continues in a motor forward
state.
Output continues in a motor reverse
state.
When "_1" or "_2" is set through "
b3 External-Input Drive Permission
Setting", the motor is driven only while
an ON signal is being input.
This terminal is minus common.
When applying a voltage, connect it to
the negative side.
b2 External-Output Signal Setting".
Remark
P. 42
P. 41
45
EN
2023/11/01 2023/11/01 16:44:30 16:44:30