Panasonic EYADA Serie Manual De Instrucciones página 32

UTILITY MENU (u + NUMBER)
u1 Soft Start & Soft Snug Time Setting
The duration of soft start and the start time
of soft snug can be set.
The speed of soft start and the speed of
soft snug should be set in " u2 Soft Start
Speed Level Setting" and " u3 Soft Snug
Speed Level Setting" respectively.
P. 33, 34
• The start time of the soft snug must not be
shorter than the duration of the soft start.
What is soft start?
In order to prevent cross threading and
screw galling, initially a screw is rotated
slowly at the beginning of fastening.
■ Setting Procedure
Switch to setting mode.
Set the forward/reverse lever to
the trigger switch lock position, and
hold down the OK button.
Choose "u1" by pressing
the ▲ and ▼ buttons, and
press the OK button.
A set value appears on the display.
Select a desired one by
pressing the ▲ and ▼
buttons.
The duration of soft start can be
set. The default is "-.-". If soft start
is unnecessary, set it to "-.-".
Display
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep).
32
EN
EYADA_EU.indb EYADA_EU.indb 32 32
P. 22
Soft start duration
OFF
0.1 s
9.9 s
Soft start
time
Working
Work start
(Rotating)
What is soft snug?
In order to prevent bit detachment and
minimize the impact on the base material, the
bit is rotated slowly before snugging.
Select a desired one by
pressing the ▲ and ▼
buttons.
The start time of soft snug can be
set. The default is "-.-". If soft snug
is unnecessary, set it to "- -".
Display Soft snug start time
Press the OK button to
confirm it.
When the setting is completed, a
buzzer sounds long (a long beep),
and the display returns to the menu
screen.
The speed level should be set in
"u2" for soft start and in "u3" for
soft snug.
7
Back to Operation Mode.
Hold down the OK button.
Soft snug
time
Fastening
OK
OFF
0.1 s
9.9 s
P. 22
2023/11/01 2023/11/01 16:44:27 16:44:27