Publicidad
Idiomas disponibles
Idiomas disponibles
RESETTING THE APPLIANCE
If the safety thermostat is tripped, the appliance has
to be restored to the initial working conditions as fol-
lows.
1 - Allow the oil to cool to 30-40°C.
2 - Open the hatch (A).
3 - Press the button (B) of the safety thermostat
tripped to restore the electricity supply.
4 - Close the hatch (A).
LENGTHY DOWNTIMES OF APPLIANCE
If the appliance is to be out of use for a lengthy pe-
riod, proceed as follows.
1 - Cut off the mains electricity supply using the ap-
pliance's master switch.
2 - Clean the appliance and the surrounding areas
thoroughly.
USEFUL ADVICE FOR USE
To ensure correct use of the appliance, the follow-
ing rules should be adopted.
– Use only the accessories recommended by the
constructor.
– Use the baskets as appropriate.
– Before filling the well, check that the drain tap (A)
is turned off.
– Check that the oil level never drops underneath
the minimum level marked (B).
– Use single-seed oils or blends of oils specially re-
commended for fryers.
– Melt solid fats in a separate container to avoid
damaging the appliance.
– Do not use the appliance until the oil is at working
temperature.
– Lower the basket slowly to prevent foaming.
– Filter the frying oil often to remove working resi-
dues.
– Never use the appliance with no oil in the well, as
this may damage its structure.
– Use the basket hanger support to drain the foods
fried.
3 - Spread a film of edible oil over the stain-
less steel surfaces.
4 - Carry out all the servicing procedures.
5 - Leave the appliance uncovered and the
cooking chambers open.
A
– If the appliance is to be out of use for a short time,
reduce the oil temperature to the minimum level
or switch off the appliance to prevent unneces-
sary gas consumption and ageing of the oil.
– Change the
160÷180°C or when it becomes dark in colour.
- 11 -
B
A
B
A
IDM-39611800800.tif
IDM-39611800900.tif
oil
when it fumes between
IT
GB
DE
B
FR
ES
English
Publicidad
