Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Although the appliance is complete with all sa-
fety devices, during installation and connection
additional devices must be added if necessary
to comply with the relevant legal requirements.
The illustration shows the position of the devi-
ces .
Safety thermostat: cuts off the electricity
A)
supply in case of overheating.
The illustration shows the position of the signs
fi tted on the appliance.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water jets at
internal parts.
WARNING: draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING: draws the attention on
E)
compliance with the rules. "The Manufac-
turer declines all liability in case of failure to
comply with the installation and commis-
sioning instructions".
WARNING: watch out for hot sur-
F)
faces.
4
SAFETY DEVICES
SAFETY AND INFORMATION SIGNS
A
A
E
D
G
A
H
CE marking: this indicates that the equip-
G)
ment is compliant with all relevant laws ap-
plicable to the product.
WEEE symbol: indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
SAFETY
37M3202
F
C
B
3269930_ut_GB_rev.3
Publicidad
