Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY
HAZARDS AND SAFETY PROVISIONS DURING APPLIANCE DECOMMISSIONING
When decommissioning the appliance, watch out for the following hazards and provide for the
countermeasures indicated below:
► Source of hazard: electric power
Hazard
Risk of electric
shock caused by
live components
► Source of hazard: handling of heavy loads
Where or in which situations
Hazard
does the hazard occur?
Risk of injury due
When the appliance moves • Use a suitable lifting de-
to body overload
► Source of hazard: hisk generated by materials/substances
Hazard
C o n c e n t r a t i o n
of unburned gas
emissions due to
an incorrect appli-
ance
decommis-
sioning
3269930_ut_GB_rev.3
Where or in which situations
does the hazard occur?
• On the power cable
• Under protective panels
• Under the control panel
• Under protection covers
Where or in which situations
does the hazard occur?
During appliance decom-
missioning
Countermeasures
• Operations to the electric
system may be carried out
by authorised and qualifi ed
staff only, in accordance
with the relevant applica-
ble laws.
• Specialist procedure
• Turn off the power supply
before removing the covers
• Secure it to prevent acci-
dental switching on
• Ensure that there is no volt-
age
Countermeasures
vice
• Observe the limit values
for lifting and transport
• Wear personal protective
equipment
Countermeasures
Decommissioning opera-
tions must be carried out
by qualifi ed personnel
ENGLISH
Safety device
• Pr o t e c t i o n
panels
• S y s t e m
switch- dis-
connector
Safety device
• Protective gloves
• Protective shoes
• Safety
helmet
(e.g.
for
sus-
pended
loads,
overhead opera-
tions...)
Safety device
None
11
Publicidad
