GET SX1 PRO 2T Guia Del Usuario página 10

2.
Remove the protection
caps and connect the
RESET TPS cable (included
in the package) to the
"MAIN" connector of the
SX1 PRO 2T control unit.
As an alternative to the
RESET TPS cable, you can
use the original Wake-up
connector supplied with the
motorcycle by connecting it
to the diagnosis socket.
2 1
3.
Connect a fully charged
12V battery to the "RESET
TPS" cable: first the red wire
to the positive (+) pole and
then the black wire to the
negative (-) pole.
4.
Rotate the throttle fully
forward to ensure it is in the
closed position during this
operation. Press and hold
the engine stop button for
5 seconds or until the GET
5 sec.
SX1 Pro 2T ECU turns on
the fuel pump and the MIL
(Malfunction Indicator Lamp),
when present. By doing this,
the minimum TPS value is
saved.
EN
10